flashlogic and avxdata prestige remote st

I have a 06 JEEP GRAND CHEROKEE SRT8. I installed flashlogic ch5 remote start and is working, so then i purchased a prestige extended range and avxdata and i did flash the flashlogic module for the extended prestige remote. I cant get the prestige remote to work, is there a certain way to add the the avxdata and the prestige remote

The AVX data should plug into the Flashlogic, the antenna cable should plug into the AVX Data and be mounted on the windshield. Turn the ignition to "on", press the button on the antenna 3 times. You should hear a single horn honk/light flash, telling you that you are in program mode. Press the lock button on the transmitter once, and you will hear a confirmation honk. Turn key off, system will honk (1 short, 1 long honk) within 20 seconds or so indicating that you are out of program mode.   You should be all set.Lectric Guy

Lectricguy you rock that was it, if your ever in ohio beers are on me THANK YOU!

Fantastic! Happy to help out...Cheers!Lectric Guy