2007 Honda Element DBALL2 Issues

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Honda Element DBALL2 Issues

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

savagem

Member - Posts: 9

Joined: January 08, 2017

Location: Ontario, Canada

Posted: January 30, 2017 at 10:23 AM / IP Logged

I have just finished the install of a Viper 4806V w/DBALL2 in my Honda Element. Unfortunately, I can't get the door locks to work. The DBALL2 appears to be receiving the unlock/lock commands from the 4806V but it is unable to unlock the truck. I have tried to connect the Yellow/Black (Door Lock Data Wire on DBALL2) to Blue/Orange (Keyless Entry Data) on the Honda at the keyless module and behind the the fuse panel without success. Does anyone have any suggestions?

Back to Top

silvercivicsir

Copper - Posts: 406

Joined: November 21, 2003

Posted: January 30, 2017 at 4:14 PM / IP Logged

hard wire door locks from the 4806V to the car Lock is WHITE/ blue and unlock is WHITE/ green ---> above driver's kick

Back to Top

Search for other posts by silvercivicsir

savagem

Member - Posts: 9

Joined: January 08, 2017

Location: Ontario, Canada

Posted: January 31, 2017 at 8:12 AM / IP Logged

silvercivicsir wrote:

hard wire door locks from the 4806V to the car Lock is WHITE/ blue and unlock is WHITE/ green --- > above driver's kick

So does that mean every feature the DBALL2 is supposed to support via the data wire needs to be hardwired?

Back to Top

silvercivicsir

Copper - Posts: 406

Joined: November 21, 2003

Posted: January 31, 2017 at 4:02 PM / IP Logged

my experience has been hit or miss with the dball. assuming you tagged the correct blue/orange wire, it should work. If it doesn't I would just hardwire the locks from the 4706v to the car, and be thankful that dball works for the transponder.

Back to Top

savagem

Member - Posts: 9

Joined: January 08, 2017

Location: Ontario, Canada

Posted: February 01, 2017 at 12:13 PM / IP Logged

I just received an email from the manufacturer suggesting I do the same. You would think that they would either update the firmware to make sure DBALL2 is compatible or remove the Honda Element from the list. What a waste of time.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.