2010 infiniti fx35 viper 5706v with dball2

Home / the12volt's Install Bay / Car Security and Convenience / 2010 infiniti fx35 viper 5706v with dball2

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

35chaser

Member - Posts: 6

Joined: August 09, 2010

Location: Massachusetts, United States

Posted: November 05, 2017 at 4:04 PM / IP Logged

Hi guys, I did an install today and having problem with keeping the car running after I unlock and step inside. When I try to take over the r/s shuts down and try to r/s the car again? It acts as if I’m not there to take over within 45 sec.

I used to work on mobile electronics over 6 years ago. So its been a while and I decided to install one in my fx. This is my first attempt on one with intelligent key and dball2 unit.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.