EZ Start EZ75 Remote Start Antenna Unit Wiring

Home / the12volt's Install Bay / Car Security and Convenience / EZ Start EZ75 Remote Start Antenna Unit Wiring

Welcome Guest :)

Members

< Prev Topic Next Topic >

danthemechanic

Member - Posts: 1

Joined: September 03, 2018

Location: California, United States

Posted: September 03, 2018 at 7:21 PM / IP Logged

I have an EZ Start EZ75 remote start and the wires connecting to the antenna unit disconnected from the antenna unit PCB. I would greatly appreciate it if somebody could post a picture of how the wires are attached to the PCB.

Search for other posts by danthemechanic

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.