2012 Civic LX, Accessory 2

Home / the12volt's Install Bay / Car Security and Convenience / 2012 Civic LX, Accessory 2

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

pomerlo

Member - Posts: 9

Joined: November 11, 2004

Location: Canada

Posted: September 27, 2018 at 8:13 AM / IP Logged

Will install a 4806V and a ADS-ALCA in a civic 2012 LX.

Is the accessory 2 (RED at ignition switch pin 3) need to be supplied ?

If yes.. is it best to use the flex relay set in acc2 mode ?

Thanks in advance

Back to Top

silvercivicsir

Copper - Posts: 406

Joined: November 21, 2003

Posted: September 27, 2018 at 5:10 PM / IP Logged

not needed.. but since you have the Pink/white wire, might as well hook it up.

Back to Top

Search for other posts by silvercivicsir

pomerlo

Member - Posts: 9

Joined: November 11, 2004

Location: Canada

Posted: September 27, 2018 at 7:02 PM / IP Logged

Many thanks for your answer.

Do you know what accessories would not work if not supplied ?

Back to Top

silvercivicsir

Copper - Posts: 406

Joined: November 21, 2003

Posted: September 28, 2018 at 2:34 PM / IP Logged

radio

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.