Remote Text Programming

Home / the12volt's Install Bay / Car Security and Convenience / Remote Text Programming

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dman007

Copper - Posts: 106

Joined: November 24, 2002

Location: Florida, United States

Posted: December 06, 2018 at 12:37 PM / IP Logged

Viper 5706V installed with 508D Proximity Sensor plugged into port 2. Bitwriter Programmed "Zone 4 Sensor Type" Field Disturbance. With shock sensor unplugged, when a warn away is triggered for the proximity sensor. Remote states Sensor 2 Warn away with shock hammer icon. But when a full alarm is triggered by the proximity sensor, the correct "Field Disturbance" text comes on. How do I get the Responder LC remote to display the correct icon and text for the proximity sensor.

Thanks

DTS Performance

St Petersburg, FL

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.