2014 Ford Mustang GT Alarm/Remote Start

Hello everyone. Few years ago i bought overseas an alarm system called Magicar M908F. The remote looks exactly like compustar T11. After returning to USA, stopped few shops and none wanted to install. Now I want to do by myself, but getting confused with wiring diagram and location, I saw a post of 2013 mustang diagram, which I took info. I know the car needs immobilizer. Looking to Get Fortin EVO-RIDE, since i read key in encryped with 80bit and Evo supports 40,60,80. Anyway if anyone can help me out would be great.

Forgot mention it is manual

I don't see any input designated for the neutral switch or an output to drive the immobilizer. You mention that the unit you purchased is Magicar M908F but the wiring diagram is labelled as MTE302. Is there a mismatch here?

over seas they only use things like dei 556u and the customer loses a key. Ive been told by numerous people it is illegal for aftermarket remote starts to "clone" or "duplicate" factory key codes. You could always do a relay to switch from a + to a - from the ignition wire to activate the bypass module. Thats what we did in the early 90s before there were commercial remote starts33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!