1990 Chevrolet C1500, Viper 4806v

Home / the12volt's Install Bay / Car Security and Convenience / 1990 Chevrolet C1500, Viper 4806v

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

904go

Member - Posts: 2

Joined: June 09, 2020

Location: California, United States

Posted: June 09, 2020 at 2:27 PM / IP Logged

Hello everyone. I’m new here and need help connecting a viper 4806v to get my truck started. I don’t understand the remote start 8 pin connector . Which wires do I hook up ? How do I set up relays for the second ignition? What wires do I use from the 8 pin ? I have the truck wires ready I just don’t know how to go about it . Thank you all . 1990 Chevrolet C1500, Viper 4806v -- posted image.

1990 Chevrolet C1500, Viper 4806v -- posted image.

MrQuijas

Back to Top

kreg357

Platinum - Posts: 7,783

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: June 10, 2020 at 1:01 AM / IP Logged

Think you got it pretty much figured out, going by the highlighted wires.

Red and Red/Black will go to +12V Constant.

Pink Ign1 will go to Pink Ign1.

Violet will go to Purple Starter.

Orange will go to Orange Acc.

Going by the wire chart, your truck does not have a Ign2 or Acc2 so the Pink/White is not used as are the Red/White supply and Pink/Black wires.

Double check your power lock wires, they might be Type A (+). In that case the 4806 Type B (-) outputs won't work. You will need a 451M door lock module to make the - to + conversion

That should do it unless your truck has a manual transmission.

Soldering is fun!

Back to Top

904go

Member - Posts: 2

Joined: June 09, 2020

Location: California, United States

Posted: June 10, 2020 at 6:26 PM / IP Logged

Thank you for your help, I got it working.

MrQuijas

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.