remote start

Home / the12volt's Install Bay / Car Security and Convenience / remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

babysm0ky

Member - Posts: 2

Joined: June 27, 2002

Location: United States

Posted: June 27, 2002 at 4:21 PM / IP Logged

remote start for a 99 acura integra,

i hook an the crimestopper cs-2006fm , and everthing seem to work fine : alarm goes when the door is open or the shock sensor if trigger, light goes off and on , door lock, but i how do i intall the remote start? the alarm has a remote start feature , but in help to install it

the

sm0ky

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 27, 2002 at 11:04 PM / IP Logged

You will need to attach the remaining wires that are on the main harness of the 2006 to the starter, ignition 1 and 2 , accessory , tach wire, brake wire, and also your lights if you haven't already done so. Here's the wiring diagram for the 1999 Acura Integra:

Acura

Integra

1996-2001

Remote Starter Wiring Colors and Notes
Function		Vehicle Color	Location
Start:		BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #1:		BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #2:		YELLOW	IGNITION SWITCH HARNESS
Ignition #3:		N/A
Accessory:		WHITE/ BLACK	IGNITION SWITCH HARNESS
Brake Light:		GREEN / WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:		BLUE	AT DISTRIBUTOR OR TACH TEST CONN. *
Parking Lights:		RED / GREEN (+)	AT HEADLIGHT SWITCH **
Headlights:		RED / WHITE (+)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:		BLUE (-)	AT SECURITY CONTROL MODULE ****
OEM Alarm Arm:		N/A
Diesel Glow Plug:		N/A	N/A
Clutch Bypass Wire:		BLUE/BLACK (-)	AT SWITCH ABOVE CLUTCH PEDAL
Notes:	* Distributor Located On Passenger Side Of Engine. Tach Test Connector Is a 2 Pin GRAY Connector Located On Driver Rear Of Engine On Strut Tower. Tach Wire Also Located In 16 Pin GRAY Connector Above Fuse Block Behind Driver Dash.

Acura

Integra

1996-2001

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		WHITE/ BLACK	IGNITION SWITCH HARNESS
Starter Kill:		BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition +12 Volts:		BLACK / YELLOW	IGNITION SWITCH HARNESS
Dome Lights/Superv:		L GREEN/ RED (-)	14 PIN GRAY CONN. IN DR. KICK PANEL
OEM Horn:		BLUE/GREEN (-)	STEERING COLUMN HARNESS
Power Lock:		BLACK/ WHITE	14 PIN GRAY CONNECTOR IN DRIVER'S KICK
Power Unlock:		BLACK/ RED	PANEL***
Trunk Release:		N/A	CABLE OPERATED
Alarm Input Wire:		L GREEN/ RED (-)	14 PIN GRAY CONN. IN DR. KICK PANEL
Notes:	RED / BLACK (+) In 18 Pin BROWN Connector In Driver Kick Panel Can Also Be Used For Parking Lights. * Negative Pulse Door Lock **** Security Control Module Located on Driver's Side Of Vehicle Right Of Steering Column.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.