door lock output

Home / the12volt's Install Bay / Car Security and Convenience / door lock output (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Rams Z

Member - Posts: 14

Joined: July 06, 2003

Location: United States

Posted: August 08, 2003 at 8:43 AM / IP Logged

I have a Avant Guard 4 and I'm trying to install the after market Spal power door lock kit. My question is: I hooked up my Digital Multimeter red lead to 12v contant and the black lead to each of the 6 leads out of the Avant Guard 4 to see if I get anything when I try and lock the door with the remote. I get nothing out of any of the power door leads from the alarm.

What am I doing wrong?

Is it something with the alarm?

Or something that needs to be programed into it?

Please help.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 08, 2003 at 11:25 AM / IP Logged

Try GROUNDING the BLACK lead and testing the RED lead to the wires. The SPAL might use a (+) Type B system instead of the traditional (-) Type A systems found in most KE & alarm systems.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Rams Z

Member - Posts: 14

Joined: July 06, 2003

Location: United States

Posted: August 08, 2003 at 11:52 AM / IP Logged

Door locks work fine. My problem is interfacing with alarm. I dont get anything out from the alarm? should I see 12volt ground pulse when I arm?

Tried all six wires from the avantguard and I get nothing on the multimeter when I arm disarm.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 08, 2003 at 1:46 PM / IP Logged

I answered your post here: https://www.the12volt.com/installbay/forum_posts.asp?tid=17348&PN=1&tpn=1

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door lock output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.