2002 volkswagen golf help

Home / the12volt's Install Bay / Car Security and Convenience / 2002 volkswagen golf help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Am3rikaz_m0st_W

Member - Posts: 8

Joined: August 15, 2003

Location: United Kingdom

Posted: August 27, 2003 at 6:28 AM / IP Logged

please could sum1 tell me the colour and location of the NEGATIVE ARMED OUTPUT wire and the NEGATIVE TRIGGER INPUT wire in a 2002 model volkswagen golf.

Ive asked nearly all the volkswagen dealerships in the area and they all tell me some long winded crap basicalli saying no and telling me to get their installers to install it for me. please help so i can finish off my alarm installation. thanks.

Search for other posts by Am3rikaz_m0st_W

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: August 27, 2003 at 7:16 AM / IP Logged

The Door lock and unlock wires will arm and disarm the factory VW alarm system.

Volkswagen

Golf

1999-2002

Alarm and Keyless Entry Wiring Colors and Notes

Function

Vehicle Color

Location

Constant +12 Volts:

RED

IGNITION SWITCH HARNESS

Starter Kill:

RED / BLUE

IGNITION SWITCH HARNESS

Ignition +12 Volts:

BLACK

IGNITION SWITCH HARNESS

Dome Lights/Superv:

BROWN / WHITE (-)

OR BLUE/GRAY (-) AT ALARM MODULE

OEM Horn:

BLACK / YELLOW

AT 3-PIN PLUG BEHIND FUSE PANEL

Power Lock:

YELLOW/BLUE (-)

IN DRIVER'S DOOR OR RED / BLUE IN DR. KICK

Power Unlock:

DK. GREEN/ RED (-)

IN DRIVER'S DOOR OR RED / LT. GREEN ***

Trunk Release:

GRAY

AT SWITCH IN GLOVE BOX

Alarm Input Wire:

BROWN / WHITE (-)

OR BLUE/GRAY (-) AT ALARM MODULE

Notes:

* Split Parking Light System - Diode Isolate Each Wire With 6 Amp Diodes. ** Alarm Disarms With Single Pulse To The Unlock Wire. *** Two Consecutive Pulses, Unlocks The Door.

Am3rikaz_m0st_W

Member - Posts: 8

Joined: August 15, 2003

Location: United Kingdom

Posted: August 27, 2003 at 7:39 AM / IP Logged

thanks for the help 10nesne1, ill let u know if i need nemore help.

Am3rikaz_m0st_W

Member - Posts: 8

Joined: August 15, 2003

Location: United Kingdom

Posted: September 03, 2003 at 2:10 AM / IP Logged

when tapping into the trigger input, will i need to put a diode in the wire from the alarm unit to stop the current flowing back into the alarm unit?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 volkswagen golf help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.