Programming Alpine Alarm?

Home / the12volt's Install Bay / Car Security and Convenience / Programming Alpine Alarm? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

turd

Member - Posts: 21

Joined: April 08, 2003

Location: Canada

Posted: September 03, 2003 at 6:55 AM / IP Logged

I installed an Alpine sec-150r into my classic Mustang.

I am at the point where I need to finish the install and program it.

Are they hard to program? The box top and mannual has instructions....but I am a little nervous that I might screw something up.

What is your view?

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: September 03, 2003 at 9:41 AM / IP Logged

It's pretty simple and follow the instructions on the Box or Manuel.

BTW, the Alpine SEC-150R prox made not work on the programming. This alarm has issue with the prox on the old shippment and new shippment with new updated programming and still has issue. It will allow you to move the field Bigger or Smaller on both inner and outter zone. Everything works fine and execpt the prox doesn't work. It allow you to do the programming but it just dead. I tried 4 different Brain and Prox and it's still dead. The Alpine Rep haven't got back to me with this issue.

Good luck

elrayodesinaloa

Copper - Posts: 120

Joined: April 28, 2003

Location: United States

Posted: September 03, 2003 at 12:49 PM / IP Logged

I personally hate alpine alarms good thing we don't install them anymore. Especially that annoying arm/disarm chirp. But, good luck and I hope you enjoy it.

Search for other posts by elrayodesinaloa

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Programming Alpine Alarm?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.