alpine 150r

Home / the12volt's Install Bay / Car Security and Convenience / alpine 150r (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jpawloski

Member - Posts: 9

Joined: May 14, 2003

Location: Canada

Posted: September 09, 2003 at 11:33 PM / IP Logged

hi, i just bought a alpine 150r and im trying to wire my actuator but it will not work ....i have used the diagram but still no go.....then i noticed in the manual that the outputs on this alarm for the doors are both positve and negative....on each wire blue=p&n, green=p&n?>

what do I need

thx

ASAP

c2deez

Copper - Posts: 71

Joined: June 17, 2002

Location: United States

Posted: September 09, 2003 at 11:43 PM / IP Logged

You need to add 2 relays r1 & r2

r1:

85--output from alarm

86--12v+

87--12v+

87a--ground

30--wire from actuator

r2:

85--other output from alarm

86--12v+

87--12v+

87a--ground

30--other wire from actuator

Don't worry about which is which, if the lock\unlock is backwards then move the wire from r1 pin 85 to r2 pin 85(and vice versa)

jpawloski

Member - Posts: 9

Joined: May 14, 2003

Location: Canada

Posted: September 10, 2003 at 12:08 AM / IP Logged

tried this and it will not work.....

c2deez

Copper - Posts: 71

Joined: June 17, 2002

Location: United States

Posted: September 10, 2003 at 7:00 AM / IP Logged

Does the motor work? Use a battery from a cordless drill to try and energize the motor.

jpawloski

Member - Posts: 9

Joined: May 14, 2003

Location: Canada

Posted: September 16, 2003 at 11:54 AM / IP Logged

got it working, (ended up being a defective actuator) there goes $14

thx again

used this

r1:

85--output from alarm

86--12v+

87--12v+

87a--ground

30--wire from actuator

r2:

85--other output from alarm

86--12v+

87--12v+

87a--ground

30--other wire from actuator

jpawloski

Member - Posts: 9

Joined: May 14, 2003

Location: Canada

Posted: September 16, 2003 at 12:04 PM / IP Logged

got it working, (ended up being a defective actuator) there goes $14

thx again

used this

r1:

85--output from alarm

86--12v+

87--12v+

87a--ground

30--wire from actuator

r2:

85--other output from alarm

86--12v+

87--12v+

87a--ground

30--other wire from actuator

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine 150r

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.