RPM wire for auto start

Home / the12volt's Install Bay / Car Security and Convenience / RPM wire for auto start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Illuminatrix

Member - Posts: 23

Joined: September 21, 2003

Location: Canada

Posted: October 25, 2003 at 9:00 AM / IP Logged

Well first question first.

This site says to use the Brown Red from coil another site says use the white from the ecm. 1999 hyundai accent. Which one should I use.

Second Problem. I recently cut the brown red and spliced with solder car then ran like a bag of dirt so I removed the splice and put it to normal. Car still ran like crap. Bought a new coil and still the same. Bought an OBD2 and nothing read. While the OBD2 was reading, the engine was in on position for quite a while and the coil pack on the fire wall side got extremely hot and started smoking. Not good. Can someone tell me why this would happen. No wires were crossed ONLY ONE was cut and put back.

Cheers

Travis

Back to Top

daniel2002p

Silver - Posts: 524

Joined: October 10, 2003

Location: United States

Posted: October 25, 2003 at 9:14 AM / IP Logged

As far as the Tach, both locatoins are correct, but I prefer under the dash by the ecm because it is more accurate than under tthe hood. As far as running like crap, I have no idea about that, I have broken wires before and put them back together, and that never happened.

2005 Toyota Corolla S

1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Back to Top

Illuminatrix

Member - Posts: 23

Joined: September 21, 2003

Location: Canada

Posted: October 25, 2003 at 11:05 AM / IP Logged

No wires were crossed BUT I friggen connected the shielding to the wire itself when I reconnected. I fixed this and I am now charging the battery I hope this works.

Cheers

Travis

Back to Top

Illuminatrix

Member - Posts: 23

Joined: September 21, 2003

Location: Canada

Posted: October 25, 2003 at 11:36 AM / IP Logged

It works now

I am really pissed at MYSELF

ARRRGGGG

Travis

Back to Top

idiesel

Member - Posts: 3

Joined: October 25, 2003

Location: Canada

Posted: October 25, 2003 at 1:23 PM / IP Logged

Most starter systems allow the black wires @ injector harness for tach if a coil wire is inaccessable. Works well if starter can learn tach signal.

idiesel

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

RPM wire for auto start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.