’00 Camry Alarm Install Pointers?

Home / the12volt's Install Bay / Car Security and Convenience / ’00 Camry Alarm Install Pointers? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Coomer

Copper - Posts: 103

Joined: November 29, 2002

Location: United States

Posted: November 13, 2003 at 1:05 AM / IP Logged

Hi,

My dad just got a '00 Toyota Camry with power door locks and windows but no keyless entry, and he wants me to install an alarm system in it, mainly so that he'll have keyless entry. I've installed an alarm with remote start on my '94 Celica before, and I'm aware of how to correctly and safely install an alarm using SPDT relays and diodes where needed and such. I'm curious as to whether or not anyone has any tips or pointers for the installation. Also, how hard is a basic alarm install on a '97-'01 Camry?

Also, on this thread, it says that I should use the unlock and lock wires that test when the key is in the passenger-side door, and that these wires are dark blue, and dark blue/white. I plan to do this instead of using the wires indicated here, unless anyone can suggest why I shouldn't do this.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 13, 2003 at 11:59 AM / IP Logged

Make: Toyota

Model: Camry

Year: 1999-01

This Database Was Last Updated On: 6/9/03

Index #: 6791

Alarm

Constant 12 volts WHITE & WHITE/ RED IGNITION SWITCH HARNESS

Ignition 12 volts BLACK/ RED IGNITION SWITCH HARNESS

Starter RED IGNITION SWITCH HARNESS

Dome Light RED / WHITE (-) 7 PIN CONNECTOR AT THE FUSE BLOCK

Trunk Pin Switch RED / YELLOW (-) AT LIGHT IN TRUNK

Parking Lamp GREEN (+) 13 PIN CONNECTOR AT THE FUSE BLOCK

Power Lock L GREEN 20 PIN WHITE CONNECTOR

Power Unlock D GREEN IN DRIVER KICK PANEL * #209

* Child Safety Lock - BLUE/RED (-) In Same Connector As Door Lock Wires Above. #209- See Child Safety Lock Diagram.

Remote Start

Tach Signal BLACK/ ORANGE AT ENGINE CONTROL MODULE * #239

Ignition #2 BLACK / YELLOW IGNITION SWITCH HARNESS (HEAT/AC/ECM)

Ignition #3 N/A

Accessory BLUE/RED IGNITION SWITCH HARNESS

Neutral Safety NOT GROUNDING TYPE - OEM SWITCH OPENS STARTER CIRCUIT

Brake Light GREEN / WHITE (+) AT SWITCH ABOVE BRAKE PEDAL

Reverse Light RED / BLACK (+) AT SWITCH ON TRANSMISSION

Rear Window Defrost YELLOW /GREEN (-) REAR DEFOGGER SWITCH

* Engine Control Module Is Located Behind The Glove Box. #239 - See Immobilizer Bypass Diagram.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Coomer

Copper - Posts: 103

Joined: November 29, 2002

Location: United States

Posted: November 13, 2003 at 1:47 PM / IP Logged

Interesting...I've seen four different wiring colors for the door locks from a couple different sites. Anyone else have any tips or suggestions?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 13, 2003 at 7:49 PM / IP Logged

the info should be pretty good. test with a meter, the lock wire will show 12v. when you hit the lock button, you will lose the 12v.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Scott35

Silver - Posts: 258

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 02, 2002

Location: United States

Posted: November 13, 2003 at 7:55 PM / IP Logged

You might be able to find a factory Toyota setup on ebay for a good price. They are mostly plug up, no splicing.

Tacomacrew

youngblood

Copper - Posts: 77

Joined: September 22, 2003

Location: United States

Posted: November 14, 2003 at 10:54 AM / IP Logged

the most reliable and certainly the easiest SUREFIRE 100% posive, works every time, I swear to God on my life, wires to get for unlock on the Toyota camry, years (1998-2001) is...........

UNLOCK - solid blue(royal blue)

LOCK - solid light green

These wires can be found exiting the bottom of the fuse box in an orange molex. This molex has approximately...um..15 wires or so... never really counted them. But you can bet your favorite pets left eye that these wires will work every time.... no need to tag any additional child safety unlock wires or the such. I was weened on toyota alarms and I'm thoroughly familiar with them...

Coomer

Copper - Posts: 103

Joined: November 29, 2002

Location: United States

Posted: November 14, 2003 at 11:38 AM / IP Logged

Thanks for all of the information guys! ’00 Camry Alarm Install Pointers? -- posted image.

I'll probably do the alarm install when I go home for Thanksgiving.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

’00 Camry Alarm Install Pointers?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.