compustar remote start in Acura Integra

I have a WSS-AS. Im trying to get it to work on my 96 acura integra but i cant seem to get it to work. Everything else works fine. what confuses me is the the 2 pre-wired relays. Do you need the 2nd ignition, starter and accessory for remote starter to work. THe first set is wat i have problems with. they say the colors of the wires but then they go into the relays and the colors of the wires change and then from 1 wire to the relay and then 2 wires come out. More confusing. I know you probably need the E-brake sensing and the Brake sensing. I got all the sensing wires hooked up. I think i screwed up in the 1st set of wires. But car runs and starts fine manually. Your help is appreciated.

-theres no 2nd ignition on this integra, no need -starter wire is required to remote start. if youre to install the starter kill, put the starter wre from unit to the starter side or else when you arm ur car it wont start. -power up the accessory also am not familiar with compustar, the site doesnt have the manual so i cant help with those relay/wires stuffs. Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).