Lost Remote Start Code on remote

Home / the12volt's Install Bay / Car Security and Convenience / Lost Remote Start Code on remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

marctronixx

Member - Posts: 15

Joined: April 03, 2003

Location: United States

Posted: December 19, 2003 at 6:13 PM / IP Logged

hi guys,

i finally got my remote reprogrammed back to my viper remote start alarm (one of the high frequency modles that include an antenna) X-mitter by the great advice here. however i dont know the "channel" my remote start is on? i have the 4 button remotes and i had the remote start set to button II instead of pushing buttons I and II together.

thanks for any info!

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 20, 2003 at 10:02 AM / IP Logged

Did you try pressing button for 3 secs. or longer.

Gary Kline

MECP Master Technician

marctronixx

Member - Posts: 15

Joined: April 03, 2003

Location: United States

Posted: December 20, 2003 at 10:30 AM / IP Logged

thanks for your reply.

if you mean the button on the remote.. yes i pressed it at least 5 seconds. normally within 2 sec's the lights flash and the car cranks, but since the remote has lost 'sync' with the brain i need to reprogram the remote start back on the remote, but i dont know which 'channel' the remote start is on. as stated, i got my arm/disarm/panic back on my button I so now all i need to do is get the remote start function back on button II.

i appreciate any more responses.

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 20, 2003 at 10:32 AM / IP Logged

hi try pushing but 1 nadn 22 together when they lose syn with remote it should all come back how did you get locks to work are you sure your not in velet vipers will work with locks but not rs when in valet

good luck

kirk

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 20, 2003 at 10:44 AM / IP Logged

hi did'nt think of it till now you can go to the viper website and dl install manual it will show you how to reset and reprogram remotes use the links page on this site go to directed electronics them to viper and select guiides from drop down menu.

good luck

kirk

marctronixx

Member - Posts: 15

Joined: April 03, 2003

Location: United States

Posted: December 20, 2003 at 10:44 AM / IP Logged

should not be in valet because the lighr is not lit solid like it normall is.. i can do the valet switch and turn it on valet but its not.. the locks work when the car is started.. as it was setup.. i just need my remote start to be programmed back on the rmeote and im in business... any more tips?

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 20, 2003 at 10:47 AM / IP Logged

hi we posted at the same time read the post above your hope this helps also are you sure your hood pin isn't screwed up try rs with hoop opin disconnected

good luck

kirk

marctronixx

Member - Posts: 15

Joined: April 03, 2003

Location: United States

Posted: December 20, 2003 at 10:52 AM / IP Logged

yeah we did. i will smoke that link section over... thank you... ill post with results...

marctronixx

Member - Posts: 15

Joined: April 03, 2003

Location: United States

Posted: December 20, 2003 at 11:43 AM / IP Logged

SUCCESS! the RS is on channel 3 and i programmed it flawlessly! damn i feel good.. thanks guys for all of your help!!!!!!!!!!!!!!

espceially to CK auto for the direction to the guide!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Lost Remote Start Code on remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.