remote Start on Nissan Altima

Home / the12volt's Install Bay / Car Security and Convenience / remote Start on Nissan Altima (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ekimmel

Member - Posts: 2

Joined: December 28, 2003

Location: United States

Posted: December 28, 2003 at 9:18 PM / IP Logged

I am hooking up an Prestige APS 996 ON A 2003 Nissan Altima V-6.My question is: do I need the optional multi coil pack adapter for this vehicle?I have tried to access a tach signal from both at the coil and at the ecu ,both of which are picking up a tach signal,but the remote start will only cause the starter to turn over without starting the car.However when I do a diagnostic for the alarm it is still telling me it is recieving a low or no tach signal.I have tried everything!Please help.Thank you

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 28, 2003 at 9:30 PM / IP Logged

Are you using an imobilizer defeat?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

ekimmel

Member - Posts: 2

Joined: December 28, 2003

Location: United States

Posted: December 28, 2003 at 9:39 PM / IP Logged

No,I "m installing a Audiovox Prestige APS 996a.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: December 28, 2003 at 9:46 PM / IP Logged

On the 4 cylinder vehicles it is in pin 36, and on the 6 cylinder it is in pin 34. Can also go to one of the ignition coils and use the wire that is NOT red or black. Make sure that the vehicle has reached it's lowest RPM when doing the tach signal learn procedure to ensure a proper tach siganl for the remote starter unit to learn.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: December 29, 2003 at 1:07 AM / IP Logged

Try remote starting the car with the key in the ignition cylinder in the OFF position. You'll be amazed at what happens.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote Start on Nissan Altima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.