1989 240sx, crimestopper cs-2011rs

Home / the12volt's Install Bay / Car Security and Convenience / 1989 240sx, crimestopper cs-2011rs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cabeson

Member - Posts: 3

Joined: December 29, 2003

Location: United States

Posted: December 29, 2003 at 6:07 PM / IP Logged

im having problems with my remote start. it wont crank the engine.

its a crimestopper cs-2011rs w/remote start and pager.

i had it recently installed by my buddy, he has more tech experience than me, but was un able to conect 3 remaining wires and make the remote start work.

so i decided to give it a try.

pink/white - ign2 or ACC 2

gray - Acc(accesory)

brown - starter

WHITE/ red - Tach input(RPM)

they lead to the ignition switch and the Tach wire

i connected these the following on my 89 240sx SOHC Automatic

pink/white - BLACK / YELLOW

gray - blue

brown - black yellow ( im not sure if its right but i used the same wire as above)

WHITE/ red - GREEN/ black at coil.

evrything works fine, except when i press the start engine on my transmitter it wont crank the car, is like no signal is getting to the starter. the transmitter reads succsessful start ( dont know why)

cabeson

Member - Posts: 3

Joined: December 29, 2003

Location: United States

Posted: December 29, 2003 at 6:12 PM / IP Logged

i can seem to load pic of wiring diagram.

click here and go to cs-2011rs iii

http://www.crimestopper.com/diagrams.html

cabeson

Member - Posts: 3

Joined: December 29, 2003

Location: United States

Posted: January 02, 2004 at 4:33 PM / IP Logged

i did some research and tried again, but no luck.

i installed all wires except the pink/white-- ign 2 or ACC 2 ( alarm).

the remote makes the starter crank, but only once and it doesnt turn the engine over.i tried using a relay but im not sure i did it right because the sh*t didnt work. i got the same result, ithink the wire that i need to connect is the second start wire that i need to connect inorder for the remote start to work.

anyhow, can i hook up the wire somewhere else?

at this point i dont know how to solve this problem, i need some help.

thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1989 240sx, crimestopper cs-2011rs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.