2000 GMC Sierra Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 GMC Sierra Remote Start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Sietsemr

Member - Posts: 2

Joined: January 03, 2004

Location: United States

Posted: January 04, 2004 at 10:40 PM / IP Logged

I am having difficulty finishing my installation on my 2000 GMC Sierra Bulldog remote start.

I have everything connected, but when I go to start, in tach-less mode it starts and then stops. It is like it doesn't start for quite long enough. All of the ignition relays pull in and the accessories work.

In tach mode, it starts very roughly, sort of half runs for three "cycles" and then stops and the ignition relays do not pull in.

I grabbed the tach wire from behind the instrument cluster (I found a reference to that somewhere on this site) rather than from the coil. Based on many of the posts, it sounds like I do need to be in "tach" mode. Is this correct?

Thanks much for any and all help.

Rusty

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 04, 2004 at 11:11 PM / IP Logged

if theres antitheft on this car, you need to bypass to start successfully, but try sticking the key in the cylinder w/o turning and remote started b4 bypassing the antitheft.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

D1alaska

Member - Posts: 1

Joined: January 02, 2004

Location: United States

Posted: January 04, 2004 at 11:40 PM / IP Logged

YOU HAVE A PASSLOCK II WHICH MUST BE BYPASSED A MODULE FOR THIS WILL COST YOU ABOUT $50. I JUST INSTALLED A CODEALARM WITH AUTO START ON MY 2003 SILVERADO 2500HD. DO NOT USE TACHLESS MODE YOU COULD BURN UP YOUR STARTER!!

d1alaska

mdff17

Member - Posts: 6

Joined: January 04, 2004

Location: United States

Posted: January 06, 2004 at 3:50 PM / IP Logged

i just installed a crimestopper remote start on an 03 Sierra and had the same problem. it was the antitheft. Once I put a bypass which was simple to install it was $38.00 it was also a crimestopper unit. everything works great.

trnkmnky123

Member - Posts: 19

Joined: January 06, 2004

Location: United States

Posted: January 06, 2004 at 11:14 PM / IP Logged

Yes get that bypass mod. and the tach is found on the drv side under the hood on the white plug on the computer.

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: January 07, 2004 at 1:17 AM / IP Logged

i posted the tach wire at the cluster method. its perfectly fine to use. DEI techs told me to use that as opposed to an injector or messing with finding it at the ECM under the hood as previously listed. however, the truck does have passlock II. as soon as you bypass that you should be fine 2000 GMC Sierra Remote Start -- posted image.

2000 GMC Sierra Remote Start -- posted image.

Sietsemr

Member - Posts: 2

Joined: January 03, 2004

Location: United States

Posted: January 07, 2004 at 9:53 PM / IP Logged

Hey thanks everyone for the helpful responses. I am purchasing the ol' bypass module tonight and should be in business as soon as I get it...

Thanks again.

Rusty

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 GMC Sierra Remote Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.