the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Door locks 1999 dodge caravan


Post ReplyPost New Topic
< Prev Topic Next Topic >
prorc 
Member - Posts: 4
Member spacespace
Joined: January 05, 2004
Location: Canada
Posted: January 05, 2004 at 12:37 AM / IP Logged  

I've just installed the RS114 remote starter and it works great.  One problem.  I've hooked up the door lock relays as instructed for the keyless entry and results on not good.  When I push the lock button, the lights flash 3 times and the interior bell starts to ring.  If I press the lock button again, the lights flash once and the bell stops ringing.

I do not have a factory alarm installed. 

Any ideas?

Thanks

prorc

italnpimp59 
Silver - Posts: 427
Silver spacespace
Joined: August 26, 2003
Location: United States
Posted: January 05, 2004 at 2:59 AM / IP Logged  
you have to use resistors for that vehicle to get the doors to lock and unlock...go to www.bulldogsecurity.com and find out what value.  i would tell you but for some reason...my computer wont pull that site up..maybe the site is down for now
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: January 05, 2004 at 8:51 AM / IP Logged  
Power Lock WHITE/ D GREEN BOTTOM OF JUNCTION BLOCK TWO #217
Power Unlock SINGLE WIRE SYSTEM CONNECTORS,ONE ON THE LEFT. ***
*** Single Wire Door Lock System, WHITE/ D GREEN Wire Requires Chassis Ground Thru A 1.5K Ohm Resistor To Lock And Chassis Ground Thru A 249 Ohm Resistor To Unlock. #217- See Single Wire Resisor Door Lock Diagram.
http://wiringinstructions.com/217.htm
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
prorc 
Member - Posts: 4
Member spacespace
Joined: January 05, 2004
Location: Canada
Posted: January 05, 2004 at 4:07 PM / IP Logged  

I have the right wire ( white with Green) and i have the resistors installed as per instructions.  I even double checked the connections.  Is there any othe test I can do to check the relays or the position they should be in?.

Thanks

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: January 05, 2004 at 4:48 PM / IP Logged  
how do you have them hooked up?????are you using relays????
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
prorc 
Member - Posts: 4
Member spacespace
Joined: January 05, 2004
Location: Canada
Posted: January 05, 2004 at 5:02 PM / IP Logged  
I have them hooked up as per the diagram from Bulldog Security.  I have a 250 ohm resistor and 1500 ohm resistor. One on each relay.  I made sure that the resistors were on the proper relay.
bugluvr38 
Member - Posts: 38
Member spacespace
Joined: October 13, 2003
Location: United States
Posted: January 06, 2004 at 5:12 AM / IP Logged  

hey, prorc-  i know that this is entirely off of the subject and i apologize, but who makes the rs114 remote start you installed?  ive got a remote start, rs110, and i can not get any info on it anywhere.  its like its generic, or something.  somebody gave it to me, no manual or anything, just the box and a few bundles of wire.  ive taken it apart and put it back together trying to find some kind of name, but nothin.  anyways, i was just wondering if they were related.  thanks for any info you may have.

oh, god... what did i do now??
prorc 
Member - Posts: 4
Member spacespace
Joined: January 05, 2004
Location: Canada
Posted: January 06, 2004 at 4:31 PM / IP Logged  

The system is from Bulldog Security.  If you go to the website, they have all the wiring diagrams.

www.bulldogsecurity.com

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: January 06, 2004 at 5:21 PM / IP Logged  
hey pro, take a look at this:
http://wiringinstructions.com/217.htm
sounds like they are not hooked up right.
omega makes a DSL(door lock socket)and this is how they wire up using a DSL...you should be able to make heads and tails of everthing using the link i posted.....if not drop a line....WE WILL get this figured out!
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer