DEI Remote Start Problem

Home / the12volt's Install Bay / Car Security and Convenience / DEI Remote Start Problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

heron

Member - Posts: 2

Joined: February 08, 2004

Location: United States

Posted: February 08, 2004 at 5:33 PM / IP Logged

Hello, I've got a DEI Your Valet keyless entry . Originally it was just the keyless entry. The remote start was added later and at the time I was told I could use the original keyless entry with the 2 button remote. Well, both my old remotes died and I've had to get a replacement remote. I've had no problem reprogramming the Lock and Unlock on button 1 but how do you program button 2 to do the remote start. The old remote button 1would lock,unlock. Button 2 held down would start my truck. After running button 2 would shut it off when held down. I cannot find any directions pertaining to the remote start. The directions for the keyless entry do not say anything about remote starting option. They do say you can use button 2 for the trunk pop but not how to program it....?

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: February 08, 2004 at 7:20 PM / IP Logged

You may want to check out www.directed.com for some info on programming the have installation manuals for all thier products on there.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: February 08, 2004 at 7:33 PM / IP Logged

I not sure, but do you have two seperate control modules for keyless and remote start? Seems kinda pointless to me.

In one sequence...

Turn key on, hit valet button once, hit it again and hold. Press 1 on the remote. Release valet button. Hit valet button once more, hit it again and hold. Press 2 on the remote. Release valet button. Hit valet button once more, hit it again and hold. Press both buttons on the remote. Thats channel 3.

Start over and repeat for any additional remotes.

heron

Member - Posts: 2

Joined: February 08, 2004

Location: United States

Posted: February 08, 2004 at 8:33 PM / IP Logged

JWorm wrote:

I not sure, but do you have two seperate control modules for keyless and remote start? Seems kinda pointless to me.

In one sequence...

Start over and repeat for any additional remotes.

I'm not sure about the 2 seperate modules. I know the remote start was an add on to the keyless entry. I'm not sure if there is an additional "momentary(valet) button for the remote start. All I see is the one valet button. I followed the instructions and the light flashes 3 times confirming channel 3(aux). I press channel 2 and the light flashes fast then shutts off, I assume confirming the program of channel 3 or auxillary on button 2. But, it still doesn't start the engine after all is done? That why I was wondering if there is another button I need to press on the remote start side of things. I'm positive there is nothing wrong with the remote start. The other remote worked fine starting the engine by holding down button 2. I need to pull the remote start down and see what model it is. I think its a DEI 561T.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI Remote Start Problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.