Wire Diagram needed: 1986 vw jetta

1986 VW Jetta

       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|red                 |+  |ignition harness            ||          STARTER|RED / black           |+  |ignition harness            ||         IGNITION|black               |+  |ignition harness            ||  SECOND IGNITION|                    |   |                            ||        ACCESSORY|BLACK / YELLOW        |+  |ignition harness            ||       POWER LOCK|add actuator        |   |in drivers door             ||     POWER UNLOCK|add actuator        |   |in drivers door             || PARKING LIGHTS +|gry/blk and gry/red |   |light switch                ||       HEADLIGHTS|WHITE/ black         |+  |light switch or column      ||     DOOR TRIGGER|BROWN / white *1      |-  |drivers door pin            ||  TRUNK/HATCH PIN|                    |   |                            ||         HOOD PIN|                    |   |                            ||TRNK/HTCH RELEASE|                    |   |                            ||  FCTRY ALARM ARM|                    |   |                            ||FCTRY ALRM DISARM|                    |   |                            ||       TACHOMETER|green               |   |ignition coil               ||       BRAKE WIRE|                    |   |                            ||     HORN TRIGGER|                    |   |                            ||           WIPERS|green (low)         |+  |steering column             ||  LF WINDOW UP/DN|wht/blk  /  wht     |B  |center console              ||  RF WINDOW UP/DN|                    |   |                            ||  LR WINDOW UP/DN|                    |   |                            ||  RR WINDOW UP/DN|                    |   |                            |

Notes:

*1 on models with factory dome light supervision, the delay timer is built into the dome light.  to beat the delay install a diode inline on the BROWN / white wire from the door switch with the band away from the light.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.