the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1994 honda accord ex alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
dudeimbald 
Member - Posts: 4
Member spacespace
Joined: February 20, 2004
Posted: February 20, 2004 at 3:25 PM / IP Logged  
Hello everyone...i need some help...a lot actually.k i bought this car alarm on ebay(it was cheap so what the hell) and i have no idea to what the hell im doing. i thought it would be a good project to take on. I would like to install it on a 1994 honda accord ex 4 door. the car alarm kit came with a main body, led light, override button, shock sensor, a siren and two wiring harnesses.i have been looking everywhere for some help but i cant get a good grasp of it. any help would be greatly appreciated. thanks in advance.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: February 20, 2004 at 3:47 PM / IP Logged  
short of me doing the install for you...what exactly is it you need in the way of help?  what specifically dont you understand or need help with?
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
dudeimbald 
Member - Posts: 4
Member spacespace
Joined: February 20, 2004
Posted: February 20, 2004 at 3:51 PM / IP Logged  

ha ha...i would like to know where each component goes ie. the main body and siren. also should i tap the wires near the firewall or where ever they fit.

dudeimbald 
Member - Posts: 4
Member spacespace
Joined: February 20, 2004
Posted: February 20, 2004 at 4:15 PM / IP Logged  
also starting points and tips...im seriously new to this sort of thing. thanks for reading this.
Toru 
Copper - Posts: 102
Copper spacespace
Joined: January 24, 2004
Posted: February 20, 2004 at 4:23 PM / IP Logged  
Well, the siren goes under the hood (facing down) usually near the firewall, the main unit goes high under the dash (out of the way of the pedals at least), the shock sensor usually is tie-wrapped to the steering column.
As for where to "tap" the wire, if you mean "tape" then what I do is make all my connections, then take the wiring harness and wrap all the wires in a overlapping spiral wrap of electrical tape (much like the factory harnesses). Then I tie-wrap the bundles harness to another factory harness nearby, or to some other structural piece (brackets, etc).
If you did mean "tap" then I would make your connections where it makes sense, e.g. easy to reach and within reach of the length of the harness based on position of the main unit.
dudeimbald 
Member - Posts: 4
Member spacespace
Joined: February 20, 2004
Posted: February 26, 2004 at 4:02 PM / IP Logged  
thanks for the help...i just need to find the time to get started.
ramit Damnit 
Member - Posts: 16
Member spacespace
Joined: February 17, 2004
Posted: February 26, 2004 at 6:32 PM / IP Logged  
Also i would recommend doin a search on your car "Honda Accord" in this forum or even more specific and look for post with your wiring harness diagram...so u can find out what wires your alarm will be "tapped" into on your car. hope this helps
Toru 
Copper - Posts: 102
Copper spacespace
Joined: January 24, 2004
Posted: February 26, 2004 at 7:28 PM / IP Logged  
In case you didn't see it, the wiring chart for your car is here: 1994 Honda Accord Alarm Information
Toru 
Copper - Posts: 102
Copper spacespace
Joined: January 24, 2004
Posted: February 26, 2004 at 7:35 PM / IP Logged  
BTW, which alarm did you buy?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer