91 Grand Prix Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 91 Grand Prix Remote Start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mojoman

Member - Posts: 3

Joined: February 23, 2004

Location: Canada

Posted: February 23, 2004 at 11:17 PM / IP Logged

Hello Well I hope there is someone here who could help me out. I got a autostart 1203 sh Car starter for christmas. trying to hook it up myself. I downloaded the installation off the net. So far I have got the hood pin working and the valet switch is working properly to. When I turn my valet switch on my lights flash 2 times. WHen i try to start my car with the key pad my lights flash 3 times and thats it my car doesn't even try to turn over. The only wire i haven't hooked up yet is the tach wire not sure which one that one is. Does the tach wire need to be hooked up for the car to turn over. If it does, can someone please give me some pointers. Thanks so much

mojo

Back to Top

speakerman

Member - Posts: 26

Joined: February 17, 2004

Location: United States

Posted: February 23, 2004 at 11:23 PM / IP Logged

Yes you need the tach wire to have the remote start work. The remote starter uses that wire to see if the car if started and tells it when to stop cranking by reading the rpm's. The wire is a purple white at the coil pack. That car is not that hard to find the tach in so it won't be that bad.

Back to Top

mojoman

Member - Posts: 3

Joined: February 23, 2004

Location: Canada

Posted: February 23, 2004 at 11:33 PM / IP Logged

thanks so much i'll will try to see if I can find it tomorrow when it gets light out side. Hope it works thanks. have a feelin going to get cold out one more time before spring actually hits here.

mojo

Back to Top

mojoman

Member - Posts: 3

Joined: February 23, 2004

Location: Canada

Posted: February 23, 2004 at 11:50 PM / IP Logged

One more thing if someone can help me. On that alarm auto start 1203 sh the green and brown wire are for the car locks do i need a relay for that or can i just hook them up straight to my wiring on my locks the instruction tell me to find the neg. pulse when the locks are activated.

mojo

Back to Top

speakerman

Member - Posts: 26

Joined: February 17, 2004

Location: United States

Posted: February 24, 2004 at 12:26 AM / IP Logged

The locks in your car are positve trigger so you will need relays for the locks.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

91 Grand Prix Remote Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.