sure about sensors

Home / the12volt's Install Bay / Car Security and Convenience / sure about sensors (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cocain73

Member - Posts: 6

Joined: February 24, 2004

Location: United States

Posted: February 25, 2004 at 9:28 PM / IP Logged

i need to know for sure from someone if i hook up all of the same color wires on about three dual stage shock sensors would they all work or is this safe i really need some definate answers please help me out

new to the game

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 25, 2004 at 11:02 PM / IP Logged

Depends on the type of alarm. I am sure it would be fine for the triggers but I would use a new source power and ground for the sensors.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

cocain73

Member - Posts: 6

Joined: February 24, 2004

Location: United States

Posted: February 25, 2004 at 11:07 PM / IP Logged

do you think i hooked up three more snsors to me existing one would it be safe

new to the game

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 25, 2004 at 11:09 PM / IP Logged

For the triggers only, you should use new source of power and ground for the additional sensors, If you hook up the power and the grounds to the original sensor you will run the risk of blowing the power output. Also you should isolate each sensor with diodes.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

cocain73

Member - Posts: 6

Joined: February 24, 2004

Location: United States

Posted: February 25, 2004 at 11:13 PM / IP Logged

i know this sounds funny but where can i get some diodes and what to do with them and what does it make the sensor do and if i dont use any would it hurt something help me out i know isound slow but i am trying to learn

new to the game

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

sure about sensors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.