95 Integra window module

Home / the12volt's Install Bay / Car Security and Convenience / 95 Integra window module (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

beav

Member - Posts: 14

Joined: February 18, 2004

Posted: April 05, 2004 at 9:42 PM / IP Logged

I am installing a window module onto an alarm i had previously bought. I cannot find the right wire to control the windows. Its a 2 door integra. I know its a RED / yellow for drivers side rollup and blue/red for passengers side rollup. I heard these wires are in the drivers side kick panel and there a lot of wires the same color as this. Does anybody know which wiring harness it is..or have a picture of it...or anything that would give me more detail about it...Thanks

Back to Top

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: April 06, 2004 at 12:45 AM / IP Logged

grab a multimeter and test for them.

MECP certified installer

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 06, 2004 at 12:59 AM / IP Logged

If you grab the loom of wires from between the door and the car and move them around, you will see the bunch of wires inside the car move around. You will not have much room to work with in there though.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

beav

Member - Posts: 14

Joined: February 18, 2004

Posted: April 06, 2004 at 1:04 AM / IP Logged

i have tried using a multimeter on a lot of wires with those colors and none of them have been it. I will try shaking them around that will at least narrow it down. Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 Integra window module

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.