Door Trigger

Home / the12volt's Install Bay / Car Security and Convenience / Door Trigger (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

A3a54353

Member - Posts: 4

Joined: April 03, 2004

Location: Canada

Posted: April 11, 2004 at 12:29 PM / IP Logged

I Have 88 GMC and I would like to know the correct way to wire up my door triggers , so that my dome light will work for 30 seconds when I dis aram the alarm.Do I have to use both wires,do i need to add a relay.

Alarm G1100

Violet + input

Green - Input

desh187

Copper - Posts: 310

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 13, 2002

Location: Canada

Posted: April 11, 2004 at 2:28 PM / IP Logged

does your alarm have domelight supervision?that is what keeps the domelight on for 30 secs.if your alarm has that separate wire,then you need a relay for it.

as for the door inputs,violet(+) is not used,

green(-)from alarm is used -vehicle wire is white(-)at courteousy light or pin switch.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door Trigger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.