the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1995 Intrepid Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
darkeagle 
Member - Posts: 3
Member spacespace
Joined: April 19, 2004
Posted: April 19, 2004 at 9:58 PM / IP Logged  

I'm in the process of installing a Commando Prostart 3300 unit on my 95 Dodge Intrepid. Where can I find a complete wiring diagram for my car even for the more difficult things such as the door trigger switch?

Also, does the tach wire HAVE to be installed? Or can it be tach-less start?

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: April 19, 2004 at 10:01 PM / IP Logged  
Make:   Dodge
Model: Intrepid
Year:    1993-95
Alarm
Constant 12 volts RED & PINK/BLACK IGNITION SWITCH HARNESS
Ignition 12 volts DARK BLUE IGNITION SWITCH HARNESS
Starter YELLOW IGNITION SWITCH HARNESS
Dome Light YELLOW (-) PIN SWITCH OR 12 PIN CON-DRV KICK
Trunk Pin Switch TAN/BLACK (-) DRIVER KICK PANEL - 12 PIN CONNECTOR
Parking Lamp BLACK / YELLOW @ LT SW. (+) OR BLK CONN-LEFT OF STEERING COLM
Power Lock ORANGE / WHITE IN LT.BLU 12-PIN CONNECTOR #202
Power Unlock PINK/VIOLET ON THE BACK OF FUSE BOX
#202- See Positive Pulse Door Lock Diagram.
Remote Start
Tach Signal GRAY, RED / YELLOW, BLUE / YELLOW @ COIL PACK ON ENGINE *
Ignition #2 RED / WHITE IGNITION SWITCH HARNESS (AIRBAG) #235
Ignition #3 BLACK/ ORANGE IGNITION SWITCH HARNESS (HEAT/AC)
Accessory BLACK/ WHITE IGNITION SWITCH HARNESS (WIPER/RADIO)
Neutral Safety BLACK/ GREEN GEAR SELECT SWITCH
Brake Light WHITE/ TAN (+) AT SWITCH
Reverse Light VIO/BLK OR BLK/LT GRN (+) AT SWITCH ON TRANSMISSION
Rear Window Defrost   
* Each Wire Listed Above Is A 2 Cylinder Signal. Wire Colors In Late Production Models Are RED, WHITE & BLACK At Coil Pack. #235- See Powering Extra Ignitions Diagram
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
darkeagle 
Member - Posts: 3
Member spacespace
Joined: April 19, 2004
Posted: April 20, 2004 at 7:54 AM / IP Logged  

For the door trigger, a wiring diagram tells me this:

Door Triggertan and tan/red

Then is says this on the bottom:

Tan gets drivers door, tan/red gets pass. doors. Tap both wires and diode isolate.

What does that mean? The 'tap both wires and diode isolate.'?

godsegoizhuge 
Copper - Posts: 214
Copper spacespace
Joined: December 12, 2002
Location: United States
Posted: April 20, 2004 at 8:35 AM / IP Logged  
You'd wanna goto radio shack and buy 2 1 amp diode's. Then you take the diode's and put the side with the white band on it on the tan and the other diode on the tan/red. Then you take the other ends of the two and tie them together and hook it in with whatever color your door trigger wire is.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: April 20, 2004 at 8:38 AM / IP Logged  
check for this wire:
Dome Light YELLOW (-) PIN SWITCH OR 12 PIN CON-DRV KICK
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
darkeagle 
Member - Posts: 3
Member spacespace
Joined: April 19, 2004
Posted: April 22, 2004 at 9:01 PM / IP Logged  

Where is the best place to put the shock sensor and the alarm, and how should I secure them?

Also, what type of wiring do the door locks use? 5-Wire Reverse Polarity, 3-Wire Positive, or 3-wire Negative?

Thanks so much.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer