Alarm Light Flash Output Help?

Hi,

I own a 99 Honda Civic Ex and i have a Apline SEC-8027A alarm which i got a few years back. And my problem is I recently had a PIAA 1000x foglight installed and the person that did the install had hooked it up to the alarm also. What it means is when i activate the alarm with the foglight on, both the parking lights and the foglight will flash.

Now i have taken out foglight and my parking light won't flash anymore when the alarm is arming or disarming.  I can't figure out what is wrong, Please help.

I have included the diagrams of the foglight and the alarm.

http://www.imagestation.com/picture/sraid29/p3303a559c89aad0a564d46cafff6fd32/fd59ba46.jpg

http://www.imagestation.com/picture/sraid29/p7506703e1a6cb215b849e2e878c86dad/fd59ba99.jpg

Did you check the parking light fuse on the alpine alarm's harness??? Maybe when you changed the fog's you may have blown that fuse.

Try hooking up the fog lights back up (not mounted) and see if it goes back to normal . I think  you changed something else maybe by accident during un-installation.

thanks for all your reply, i think i figured out what the problem is now, but still don't know how to fix it, so please help.

First, the fuse is ok, i think the problem is with the relay, 87, 87a, 30 something like that.  Because the fogligth wiring have a relay included, so when i unhook the foglight, the light doesn't flash amymore.

Now, i don't know if the installer for the foglight took my relay that is included with the alarm or not. So now if I want to hook fix my problem, How do i do it????? I have no clue how to do it because I am not familiar with relay.

Thanks.

Is there any wires left that you dont know of after you took the foglights out???? The alarm wire with a relay or not would have to tap into the parking light wire somewhere on your car can you find out where it is ????? Your parking light wire is RED / green at the fuse box it is a positive wire. Look there to see if you see the parking light wire off the alarm is conected there if not get the parking light wire off the alarm and connect it there but do this after you check the parking light wire off the alarm with a dmm to see if it is sending out a positive  or negative, the reason for this is that that alarm may have a built in parking light relay or it may have an adjustable polarity parking light output .If this alarm does not have a built in relay the installer may have set the output to - off the alarm to trigger those fog relays and that may be why you have no parking lights working because you have a positive parking light wire in your car. I hope this makes sense to you good luck.