wiring info 91 mercury grand marquis

i was just wondering, b4 i instll my remote starter are there more than 1 ignition and starter wires on my  91 mercury grand marquis. ive read that if there are you have to use all to make sure the starter disable and remote start work properly. ive already checked it out on the website and it only lists one of each but i think i remember checkin a while back and it had more than one ignition wire listed. any help would be appreciatedmike

yea i saw that already just wondering if there were 2 ignition wires??mike

Just one ignition wire but there are two primary ACC wires ( GREEN/ YELLOW ) but only one needs to be powered up.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

im hooking up the starter disable and remote start from the phoenix digital pd 175. i was wondering should i hook up the ignition wire from the remote start relay b4 or after the starter disable relay. the manual is not clear and it says that the alarm stays on while starting so any help would be much appreciated.mike

Your going to need to hook the remote start wire to the starter side of the wire you have cut for the starter kill so the starter can be energized.

i have a pheonix digital pd 175. its tachless and i have to hook the red wire somewhere it gets 12 volts only when the engine is runnin. i know i can hook it to the oil lamp in the dash but im not sure which side to hook it. on one side its hot when the ignition is on. on the other when the bulb is out its not nor is it when its running. so can anyone tell me how to test it to connect it properly or any other place to hook it would be great.mike

hook it to the 12 volts when engine is on....what happens is the RS reads the 12 volts on the wire and decides to stop turning the starter by thatif its jammed force it - if it breaks in the process it needed to be fixed anyway

could i hook this up like a tach wire?? or where else is there a wire that gets 12v+ only when engine is running?mike

ive got my remote start hooked up and working. i wanted it to turn on the air conditoner but i can find the right wire. ive tried all wires possible. does this mean i need to power to acc. wires? and if so will i need a relay?mike