FM-5005 Remote Sound Problems

Home / the12volt's Install Bay / Car Security and Convenience / FM-5005 Remote Sound Problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ericsan13

Member - Posts: 3

Joined: April 20, 2004

Posted: May 09, 2004 at 12:46 AM / IP Logged

Hi everyone, I installed a FM-5005 (5005 Delta, Commando, etc), and it was working just fine until the FM remote stopped making status noises recently. The remote does not tell me the status of the car, tell me if the car is trying to start, the status of the locks, etc. It also does not make noises when the passenger is trying to page me. Other than that, it works fine. I have tried resetting the power on both the alarm and remote, without success. I have also tried holding down the status button and turned the "SND" option along with other options on or off. I have a "FM TWO-WAY" remote that has 5 buttons and plays entertainer when the battey is put in. What could be wrong? Please help!

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: May 09, 2004 at 2:44 PM / IP Logged

Did you try to reprogram the transmitter? There should be different programming methods for the one way vs the two way since one requires a reply. The programming for those units is sort of annoying so make sure you do it right, or you'll never know if the problem is a programming error or a malfunction.

J Rilla

Owner/Installer

ericsan13

Member - Posts: 3

Joined: April 20, 2004

Posted: May 10, 2004 at 3:02 AM / IP Logged

My manual came without instructions on how to program the remote! I looked everywhere online but can't find anything on how to reprogram it.

ericsan13

Member - Posts: 3

Joined: April 20, 2004

Posted: May 19, 2004 at 12:09 PM / IP Logged

Hi everyone, I installed a FM-5005 (5005 Delta, Commando, etc), and it was working just fine until the 2-way FM remote stopped making status noises recently. The remote does not tell me the status of the car, tell me if the car is trying to start, the status of the locks, etc. It also does not make noises when the passenger is trying to page me. Other than that, it works fine. I have tried resetting the power on both the alarm and remote, without success. I have also tried holding down the status button and turned the "SND" option along with other options on or off. I have a "FM TWO-WAY" remote that has 5 buttons and plays entertainer when the battey is put in. I have already tried programming under option #22, using both option #1 and #2. I have also reset the battery for the alarm and the remote. What could be wrong? Please help!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

FM-5005 Remote Sound Problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.