Can't roll passenger window down

Home / the12volt's Install Bay / Car Security and Convenience / Can't roll passenger window down (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

erroneus

Member - Posts: 6

Joined: May 14, 2004

Posted: May 14, 2004 at 7:54 PM / IP Logged

Hey guys...I have the black widow 7150 alarm w/ DEI 530T window rollup/down module. I recently started having the problem that I can't roll my passenger window down through driver side window switch, I can only roll it up. However, the passenger side switch works fine, so I can roll the window up/down. I can roll both the windows down fine with the remote though. Whenever I try rolling the passenger side down through the driver side control, I hear a silent clicking noise coming from under the dash...maybe from the alarm brain? But that's all that happens, the window wont roll down.

What could the problem be? I'm never buying a black widow product again. The alarm sucks, but that's beside the point. Thanks in advance.

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: May 14, 2004 at 8:32 PM / IP Logged

The 530T basically replaces the window switch switch, this is how you have 1 touch windows. The passenger's side roll down wire from the switch probably came loose where it connected to the 530T wiring or the pin pulled out of the harness. Then again my brother was having a similar problem and it was caused by corrosion at the pins of the window module. The only thing that is wierd is that you are hearing a click when you push the button on the door. Can you tell if the click is coming from the 530T or from something else?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

erroneus

Member - Posts: 6

Joined: May 14, 2004

Posted: May 14, 2004 at 9:15 PM / IP Logged

I'm pretty sure it's coming from somewhere under the dash...which is where the brain and other sensors for the alarm are located. I had the door panel open while i was testing it and the sound didnt seem to come from the module.

erroneus

Member - Posts: 6

Joined: May 14, 2004

Posted: May 14, 2004 at 9:21 PM / IP Logged

My car is a 95 prelude, and i was checking the wiring. There are 3 harnesses that connect into the door control for the driver side. There is one that has two wires, which I think are for the passenger side switch. These arent spliced into 530T, only the other harness which has a lot more wires is spliced into it. Then again I could be completely wrong, but that's what it looks like.

Anyway, here's a wiring diagram for my car's windows:

Can't roll passenger window down -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Can't roll passenger window down

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.