problem with plymouth sundance

Home / the12volt's Install Bay / Car Security and Convenience / problem with plymouth sundance (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Snarfsmojo

Member - Posts: 1

Joined: April 27, 2003

Location: United States

Posted: May 23, 2004 at 6:42 PM / IP Logged

hopefully you guys can help me here. My fiance and i just bought a 1992 (i think) sundance on the cheap, it worked great for about... 2 weeks then *bam!* ignition switch won't work. you can turn it all the way over, and you get nuthing! no spark no whine, no chug, nothing at all... so here is my question, is it possible to hotwire this car with a button to press to start it? i'd like to be able to put the key in, turn it to "on" and press a button and have the car start... hate to think we wasted 250 bucks :(

Thanks in advance

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: May 24, 2004 at 6:16 AM / IP Logged

You may wanna try posting that question at a car repair site like Bat auto

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: May 24, 2004 at 8:00 AM / IP Logged

check your ign. switch

most cars have two switches.

one is the key switch and the other is the real ign. switch..

the one in talking about should be mounted on the top of the column under the dash. they only cost a few bucks..all the ones that i have worked on, ran araound $20.00....

you will have to check your local parts store.

the switch on the top of the column will make all of your connections as you turn the key. call and ask your parts store, they should be able to give you some advice.

good luck...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 24, 2004 at 10:12 AM / IP Logged

Try powering up all the IGN wires just like a remote starter install and then trigger the starter wire. If this works, then it's your igntion switch.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

problem with plymouth sundance

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.