2k Dodge Ram

Home / the12volt's Install Bay / Car Security and Convenience / 2k Dodge Ram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jmyinc

Copper - Posts: 59

Joined: May 02, 2002

Location: United States

Posted: September 03, 2002 at 7:58 PM / IP Logged

I installed an alamr on a 2000 Ram today. When I remote started it the check engine light stays on. Then I started it with the key and it comes on again. I reset the computer (taking the neg. batt. terminal off) and when i start with the keyit Does not come on, the i remote start and it comes on, and then with the key.

Any one know whats wrong.?

-Morgan

Back to Top

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: September 03, 2002 at 8:36 PM / IP Logged

Second ignition needs to be powered this will happen everytime. You must have not conected it, you are lucky the light went out without a trip to the dealer find the second ignition and make sure you power it while remote started. Look for a BLACK/ orange wire at the ignition this should be the problem wire.

Back to Top

Search for other posts by mobiletoys2002

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2k Dodge Ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.