2004 Dodge Ram Valet 563t

Having a problem getting A/C, heater to work with the above system. I've tried just about every wiring diagram available, with no results. I've tried running 2 30 amp relays, which worked but got very, very hot. The system works fine except no A/C and heat. My co-worker (vehicle owner) is getting impatient as the hot wether is arriving. As he told me when he got the system as a gift, " this is a easy job". I've installed quite a few of these type of remote starts with little or no problems. Any help will be greatley appreciated. Thanks in advance.dfrates

heres the link for the diagram, scroll down until you see 04 ram. carefully look at the ignition(s) or acc(s) that need to be powered. as for the relay, being hot..... never heard of it.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

need 2 ign and 2 accesories ign are pink/green and pink/white acc are blue(12awg) and pink / YELLOW (same size as ign wire) starter is yellow. use the two large red wires for power. finished 04 ram #50 or so today.Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta