Window modules in 2000 Hyundai Elantra

Hey guys, I'm installing window modules on my 2000 Hyundai Elantra. I have 2 (4) window modules from Asianwolf. They work in either 2 up/down or 4 (one way). I was planning to use a module for putting all 4 up when I arm my Viper xv790 and another for all down from my spare channel output. Is it better to run both modules all in one direction or to use each in 2 up/down mode with the sync output circuit? Next, does anyone know which type the system is on the Elantra? Rest at: Ground, Neutral or +12volts? Just wanted to get a good understanding of all the wiring before I tackle it. Thanks for the help, Steve

Also would be helpful if anyone has the wiring diagrams that show power window up/down colors. The diagram on here doesn't offer that much detail on my vehicle. Thanks, Steve

Ok, since nobody knows the answers on the window modules. Does anyone have a good wiring diagram for the 2000 Elantra that includes Power Window Wire Colors? Thanks, Steve

LEFT FRONT WINDOW UP BLUE/WHITE At Driver Window Motor Inside Door LEFT FRONT WINDOW DOWN BROWN At Driver Window Motor Inside Door RIGHT FRONT WINDOW UP LT BLUE Harness In Driver’s Kick From Driver Door RIGHT FRONT WINDOW DOWN PINK Harness In Driver’s Kick From Driver Door LEFT REAR WINDOW UP WHITE Harness In Driver’s Kick From Driver Door LEFT REAR WINDOW DOWN RED / BLACK Harness In Driver’s Kick From Driver Door RIGHT REAR WINDOW UP YELLOW Harness In Driver’s Kick From Driver Door RIGHT REAR WINDOW DOWN GREEN/ BLACK Harness In Driver’s Kick From Driver Door

Thanks osokrazay and thanks draasch for the email.