2000 Caravan Alarm/Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Caravan Alarm/Remote Start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cherga

Member - Posts: 3

Joined: May 25, 2004

Location: United States

Posted: June 14, 2004 at 10:31 PM / IP Logged

I have a 2000 Caravan that I'd like to install an alarm/remote start into. I am a novice in security but would like to attempt to install the system myself. I have a DEI Hornet 553T and the vehicle has its own factory security system installed along with keyless entry.

My goal for now is alarm, remote start, starter kill, and door locks. I've looked through some of the posts and have reviewed the wiring schemes but am really unsure of where to begin.

Does anyone have any resources such as a guided installation for this vehicle? I've found some resources on ebay offering complete install guides for $8.00 but am weary as to what I'll actually get...thinking most likely the color schemes and not much else.

Any assistance is appreciated.

Thanks

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: June 14, 2004 at 11:56 PM / IP Logged

first off..is the key gray or black? if its grey then u have to get another one and you will lose it. the key has a transponder and your vehicle wont start without it.

cherga

Member - Posts: 3

Joined: May 25, 2004

Location: United States

Posted: June 16, 2004 at 12:05 AM / IP Logged

The key is black...no transponder...

12voltfan

Member - Posts: 25

Joined: June 01, 2004

Location: United States

Posted: June 16, 2004 at 9:08 AM / IP Logged

Do not buy the e-bay guide, it's exactly the same thing that cames with any alarm. Not really helpfull

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: June 16, 2004 at 10:46 PM / IP Logged

2000 Dodge Caravan

| 12V|red |+ |ignition harness |

Notes:

*1 Not required for remote start. *2 Use relays and set up for negative trigger. Place a 4020 ohm resistor inline on the lock output, and a 665 ohm resistor inline on the unlock output. If you do not have a factory security system use a 1500 ohm for lock and a 250 ohm for unlock. *3 The door lock motor wires are located in the top left plug at the relay/fuse box under the drivers side of the dash. *4 If the van has auto lamps, see direct fax document #1080.

Be careful whose advice you buy, but be patient with those who supply it. 2000 Caravan Alarm/Remote Start -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Caravan Alarm/Remote Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.