02 Explorer 791XV Problems

Hi, my first problem is that when the vehicle remote starts and is turned off my radio will stay on until the door is opened.  How do i set it to turn off with the the car when i turn it off by remote?

and my second problem is that the remote start only runs for about 1 minute and then it shuts off.  could this be because i didnt hook up the factory disarm and rearm? what do i have to do to fix this. thanks

The radio is wired like that from the factory. The only way to change that would be to change your ignition lead to your radio.

I would also check or change your tach signal. It might not be a good source. You should be getting it from the engine  ignition coils.

thanks about the radio info. about the tach signal, i used that wire on other remote start installs on the same car. i guess ill try that tommorow though.  if anyone else knows something else. please help

the remote start works fine, it jsut doesnt run long.

j worm, what fuel injector wire should i use and where can i find one. thanks

usually shutting off after 1 min isnt a sign of a remote start working fine.  if the brain doesnt see the right transponder code it wont run right.  it never hurts to check that.

For tach, go to one of the ignition coils or coil pack and use the wire that is NOT WHITE/ lt. blue