2000 mustang remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2000 mustang remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 05, 2004 at 8:26 PM / IP Logged

im thinking about installing a remote start in a 2000 mustang...it has a manny tranny......anyone have any info on the clutch????? any help would be great.....

thanks,

david

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: August 06, 2004 at 12:01 AM / IP Logged

just find the two wires going to it and take one wire to 30 and the other to 87. take 12v constant to 86 and (-) status out to 85.

i believe the clutch wire is a part of the starter wire, pushing it in completes the circuit, or activating a relay (pushing it) works.

MECP certified installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 mustang remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.