Radio Shack LED's w/ Viper 550 ESP?

Home / the12volt's Install Bay / Car Security and Convenience / Radio Shack LED's w/ Viper 550 ESP? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mattthew278

Copper - Posts: 52

Joined: November 13, 2003

Location: United States

Posted: August 30, 2004 at 2:21 AM / IP Logged

I'm installing a Viper 550 ESP into my truck and I wanted to use two LED's from Radio Shack instead of what was provided. The two I bought are described as 2.1V 25mA 6.3mcd. Does anyone see a problem with using these instead? If not, should I just wire them in series? Thanks in advance for your help.

matt

deviousjoker

Copper - Posts: 102

Joined: April 22, 2004

Location: United States

Posted: August 30, 2004 at 10:47 AM / IP Logged

just wire them in series and you'll be fine

First Class MECP Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Radio Shack LED's w/ Viper 550 ESP?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.