2004 honda civic lx alarm

Installing alarm into my new car. My door trigger outputs from alarm are negative, also my triggers on vehichle are neg., will I need to isolate these with diodes and use relays for lock/unlock or will factory relays work. Thanks guys

Are you talking about the door trigger INPUT or the doorlock OUTPUT wires on the alarm? Two totally different things.

sorry should have phrased this more clearly, do I need to diode isolate the door trigger(sensor) inputs, and also do I need to use add on relays or can I use the factory relays with keyless entry system for the door unlock & lock outputs. Hope this is better. Install this alarm on my 98 cutlass with the diodes and add on relays, but on the 04 civic on other forums the say I need the diodes and do not need add on relays. Rather be sure before proceeding.

** The Driver's Door Trigger Is Green (-), Front Passenger Door Trigger Is Lt. GREEN/ Red (-), Rear Doors Trigger Is GREEN / WHITE (-). The Wires Are Found In The Alarm Plug In A Green Plug Above The Driver's Kick Panel. youll need diodes to isolate those wires.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).