remote start question

Home / the12volt's Install Bay / Car Security and Convenience / remote start question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dlcpsycho

Member - Posts: 4

Joined: September 06, 2004

Location: United States

Posted: September 06, 2004 at 1:00 PM / IP Logged

i purchased a matrix rs 3 and had it installed in my jeep with remote start workin... well i removed it from my jeep and installed it in my eclipse myself..... well i get the starter to start the engine but it cuts off and then trys again. almost like it doesnt relize the engine started. anyone know a cause to this problem?? thanks in advance

tjdurham

Copper - Posts: 180

Joined: July 25, 2003

Location: United States

Posted: September 06, 2004 at 1:21 PM / IP Logged

you will need to hook up the tach use any injector use the odd colored wire

dlcpsycho

Member - Posts: 4

Joined: September 06, 2004

Location: United States

Posted: September 06, 2004 at 1:26 PM / IP Logged

well i tried hooking up the tach also and connected it to green wire with and organe line but there is a white wire with blue line... so i hook it up to the right one than? but when it starts an than uts off and try to stat again like it doesnt relize the car started that mean the tach line aint connected properly?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 06, 2004 at 1:45 PM / IP Logged

Did you program the new tach wire to the remote starter ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

dlcpsycho

Member - Posts: 4

Joined: September 06, 2004

Location: United States

Posted: September 06, 2004 at 2:25 PM / IP Logged

aight i got i working finally. i just had the tach wire ont the wrong wire of the igtion plugs. thanks for all the help

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.