Auto Mate Model 435

Home / the12volt's Install Bay / Car Security and Convenience / Auto Mate Model 435 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ferndawg

Member - Posts: 1

Joined: September 06, 2004

Posted: September 06, 2004 at 10:08 PM / IP Logged

Hello all ,

I'm having problems with my Auto Mate model 435 system. The system no longer locks the doors when I arm it. It still unlocks the doors when I disarm it but not all the times. I can't figure out what is wrong. Any help is much appretiated.

Fernando

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: September 15, 2004 at 10:54 PM / IP Logged

check make sure your lock and unlock wires from the alarm module are connected to the vehicle unlock and locking system. If not solder, they may have come loose. Make sure the plug is plugged into the alarm module for the locks.

electronics

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Auto Mate Model 435

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.