compustar 2wfm problem

Home / the12volt's Install Bay / Car Security and Convenience / compustar 2wfm problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kel789

Copper - Posts: 128

Joined: June 19, 2004

Location: United States

Posted: September 12, 2004 at 9:32 PM / IP Logged

i'm not sure if this is normal so here is what happened after i installed compustar 2wfm. after i connected the battery, the alarm went on, it was difficult to turn off but i managed to it off. i did the remote learning routine. the remote LCD appears to work. i went on to press tachometer learning process but it gave 3 flashes on the parking light. according to the manual, it means i have connected the wrong tach wire. i have not double the wire connection because it was dark out by the time i tested the tach learning process. i will check it tomorrow. i am so sure that i connected the correct wire. what do you folks think? is there any missing step that i need to know?

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: September 12, 2004 at 9:59 PM / IP Logged

IF TOO HARD TO TACH WIRE USE INJECTOR WIRE IS THE SAME LIKE COMPUSTAR SAY IN THE INSTALLATION ON ALARM TOO HARD TO TURN IT OFF SOME TIME ALL YOU REMOVE BATTERRY AND PUT IT BACK OR CHANGE NEW BATTERY WILL TAKE CARE THIS

kel789

Copper - Posts: 128

Joined: June 19, 2004

Location: United States

Posted: September 12, 2004 at 11:21 PM / IP Logged

using the injectior wire? that's under the hood, right?

the alarm goes on every times on connect the battery. it appears to stop when i use the LCD remote to stop.

kel789

Copper - Posts: 128

Joined: June 19, 2004

Location: United States

Posted: September 13, 2004 at 4:57 PM / IP Logged

i have connected the wire according to the tech sheet. i wrapped the wire from the alarm around tach wire from the ECU. no solding yet because i'm at a testing stage. i have pressed the black buttom again. the parking light flashes 3 times again. if the wire is not connect, does it have 3 parking light flashes? what do you folks think?

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: September 14, 2004 at 3:08 AM / IP Logged

YOU HAVE TO TAP IN TO TACH WIRE IF YOU WRAP 3 OR 5 TIME IT DONT WORK LIKE THAT MAKE SURE YELLOW AND BLACK FROM COMPUSTAR IT DON'T WORK USE FUEL INJECTER YES UNDER THE HOOD

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: September 14, 2004 at 3:13 AM / IP Logged

on the compustar alarm when alarm go off you have to wait instill it show on lcd remote and you can turn off or they not repond

kel789

Copper - Posts: 128

Joined: June 19, 2004

Location: United States

Posted: September 15, 2004 at 10:45 PM / IP Logged

on the ECU, there are two wires of the same color. one of several tech sheets has the specific location on the 1st wire that i connected. it was not the tach wire so i tried the other wire and bingo it's the correct one. i have tech sheets from several different companies and i have 3 wires that are different from all tech sheets. jes, i don't know why tech sheets are not as accurate as i thought. anyway, i love my remote starter. thank for you help anyway.

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: September 15, 2004 at 11:57 PM / IP Logged

if you need help with car alarm or compustar alarm please let me know i have good deal for you

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar 2wfm problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.