Micro DLRX 12

Ok, my buddy just bought this #DLRX12 "12 Channel Receiver"  it has the 12 channel wires comming off of it, which are 500ma leads, when pulsed, and then it has the 3 power, ignition, power and ground. got ignition power and ground hooked up, and tested. works fine, i can get the box into programming mode, (red led on the side turns on) but i cant get the box to do anything. the remotes dont seem to work.  im just trying to get a relay to click, to verify i've got the right channel and everything, and that it will work.  we are wiring this up for door poppers.

i cant get anything to come out of any of the 12 channels.  on the 12 dip switches, tied to the channels, the jumper on means it's a momentary output, and off means it's a latched output. what exactly is a latched output?  i've tried all 12 channels, with the dip switches either way, and can not get the relay to click.  thanks to anyone who can shed some light on this, or has EVER heard of this kit. i cannot find a single page on the net about the DLRX12 kit.

once again thats a "Micro #DLRX12 12 channel reciever"  thats all the box says...