More GMDL1 Questions

Home / the12volt's Install Bay / Car Security and Convenience / More GMDL1 Questions (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mostlygarbage

Member - Posts: 3

Joined: October 07, 2004

Posted: October 18, 2004 at 12:31 PM / IP Logged

First of all, I would like to thank MO, for his help. I was trying to make the GMDL1 installation more difficult than it should have been in my '04 Trailblazer. I am still having some trouble though with the factory alarm. If I unlock the doors with the remote and then use the remote start, everything works fine. If I forget to hit the unlock first, the factory alarm goes off. Does this have to do with the pink GMDL1 wires that I didn't hook up or is this in the setup of my remote start module?

Thanks in advance for your help.

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: October 18, 2004 at 2:07 PM / IP Logged

The GMDL1 module should disarm the factory alarm when you remote start it. When the ground out when running wire is activated by the remote starter, the GMDL 1 is suppossed to send a disarm data pulse to the factory alarm/BCM. You can get around this if your remote starter can be programmed to unlock the doors prior to start-up and relock them after start-up. Check your remote starter's programming abilities for this. You may have also forgotten to place the programming jumper on the GMDL1 in the wrong position.

sparky

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

More GMDL1 Questions

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.