rs won't shut off

Home / the12volt's Install Bay / Car Security and Convenience / rs won't shut off (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hlude1

Member - Posts: 23

Joined: October 21, 2004

Location: United States

Posted: October 24, 2004 at 2:30 AM / IP Logged

just installed rs on a 98 chevy truck and if you remote start it you can only shut if off with the remote. If you push on the brake it stays on and if you put in the key, turn it on and then off, it stays on.

Back to Top

s7726

Copper - Posts: 58

Joined: February 03, 2004

Location: United States

Posted: October 24, 2004 at 3:22 AM / IP Logged

It should turn off when you hit the brake, it should not turn off if you put the key in turn it and then turn back and take it out. Check that the wire that is supposed to be connected to the brake switch is getting the correct voltage, Don't know what system you have but i think they usually want to see +12 when the brakes are on (correct me if i'm wrong). Anyway, check to see if pushing the gas pedal and getting the RPM up cuts the rs, most will kill it above 2000/ 3x idle speed.

Hope you get it working

Gavin

SWEDISH RICE!

Back to Top

hlude1

Member - Posts: 23

Joined: October 21, 2004

Location: United States

Posted: October 24, 2004 at 10:25 AM / IP Logged

will check on that

Thanks

Back to Top

SoundFX411

Copper - Posts: 153

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 20, 2002

Location: New York, United States

Posted: October 24, 2004 at 2:19 PM / IP Logged

The Brake wire on the Chevy trucks is usually White.Check to see that you have 12 volts on that wire when the brake pedal is pressed

SoundFX

Back to Top

hlude1

Member - Posts: 23

Joined: October 21, 2004

Location: United States

Posted: October 24, 2004 at 2:39 PM / IP Logged

found the white wire and tapped into it, it works good now

thanks for the help

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: October 25, 2004 at 9:55 AM / IP Logged

If the brake wire for the remote starter wasn't hooked up, you probably haven't programmed your remote starter. You should for proper performance and operation. If you don't you could have problems depending on the make and model of starter.

sparky

Back to Top

hlude1

Member - Posts: 23

Joined: October 21, 2004

Location: United States

Posted: October 27, 2004 at 5:36 PM / IP Logged

everything is hooked up now and working great.

Thanks for the help

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

rs won't shut off

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.