Viper 560XV and 03 sunfire

Home / the12volt's Install Bay / Car Security and Convenience / Viper 560XV and 03 sunfire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

catman123456

Member - Posts: 2

Joined: October 23, 2004

Posted: October 24, 2004 at 4:25 PM / IP Logged

Can someone shed some light on how to install this. I found a text version of the wiring diagram on this site, but it doesn't list everything i need.

If someone has wired these 2 togheter before, I would really appreciate some help.

I am having trouble locating the parking light (+) wire. The post on here said it was in the kick panel heading towards the rear. I can't seem to find that. Also have some concerns tieing into the 10gauge wire. How, or what kind of connector should i use. Should I cut the wire, and then solder onto it?

I am not new to wiring, just new to the whole remote start/keyless entry thing.

Thanks.

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 26, 2004 at 9:45 AM / IP Logged

i'm pretty sure you can find the parking light wire at the BCM...at least you can on the 03 Cavaliers as i've done a bunch in the last few weeks

strip back a bit of insulation on the primary wires and solder your RS wire to them, then tape the heck out of them

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

catman123456

Member - Posts: 2

Joined: October 23, 2004

Posted: October 26, 2004 at 2:35 PM / IP Logged

Kgerry-

You don't happen to have a wiring diagram for the 03 cav's do you? I know they are pretty similar in design.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: October 26, 2004 at 3:01 PM / IP Logged

The positive park light wire is indeed in the kick pannel right in the front corner of the vehicle.There is also a large loomed harness running under the dash to the left of the steering column that it is in. And as kgerry said strip back some of the 10 gauge and solder the wires then tape everything up. You always want to make sure those main wires are protected. I generally suggest staggering your splices if possible just because then they cant every short each other and its easier to make look nest because you dont have a huge bulge in the harness.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 26, 2004 at 4:05 PM / IP Logged

i just checked and yes the parking lights can be had at the BCM with all the other wiring... it's identical to the Cavys

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 560XV and 03 sunfire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.