the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 nissan sentra powerlocks


Post ReplyPost New Topic
< Prev Topic Next Topic >
SAyeed khan 
Member - Posts: 17
Member spacespace
Joined: November 04, 2004
Location: Trinidad and Tobago
Posted: November 06, 2004 at 1:34 PM / IP Logged  
how do i tap into the power lock ssystem
snguyen 
Silver - Posts: 281
Silver spacespace
Joined: October 09, 2003
Location: United States
Posted: November 06, 2004 at 1:37 PM / IP Logged  

Nissan

Sentra

2002-2004

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

WHITE/ RED

IGNITION SWITCH HARNESS

Starter  Kill:

 

BLACK/ WHITE & BLACK / YELLOW

IGNITION SWITCH HARNESS *, **

Ignition  +12 Volts:

 

BLACK/ RED

IGNITION SWITCH HARNESS

Dome  Lights/Superv:

 

RED / WHITE (-)

DRIVER'S KICK PANEL OR AT SECU ****

OEM Horn:

 

WHITE/ GREEN (-)

STEERING COLUMN HARNESS

Power  Lock:

 

GRAY (-)

AT MODULE RIGHT OF STEERING COLUMN*****

Power  Unlock:

 

PRUPLE/RED (-)

AT MODULE RIGHT OF STEERING COLUMN

Trunk  Release:

 

RED (-)

AT RELEASE SWITCH

Alarm  Input Wire:

 

RED / WHITE (-)

DRIVER'S KICK PANEL OR AT SECU ****

Notes:

*** Use Both Wires. Isolate using relays. **** SECU Is Located To The Right Of The Steering Column. Use Red (-) & RED / White (-) On Vehicles Not Equipped With Power Door Locks. Diode Isolate With Bands Facing The Remote Start/Alarm Module. *****Negative Trigger Door Locks
SAyeed khan 
Member - Posts: 17
Member spacespace
Joined: November 04, 2004
Location: Trinidad and Tobago
Posted: November 06, 2004 at 6:13 PM / IP Logged  
i know the nissan sentra carries a type B system but i am not able to get the driverside lock to work give me some insight please
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: November 06, 2004 at 6:28 PM / IP Logged  

You may have to use Relays to supply a stronger Ground for Lock / UNLock.

Have you Metered GRAY wire to see if there is any reading?
Make sure the Key is NOT in the Ignition when you try your Locks

Power LockGRAY16 PIN CONNECTOR
Power UnlockPURPLE / REDIN DRIVER KICK PANEL
Negative Pulse Door Locks

MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
SAyeed khan 
Member - Posts: 17
Member spacespace
Joined: November 04, 2004
Location: Trinidad and Tobago
Posted: November 06, 2004 at 7:11 PM / IP Logged  
the alarm I'm using has relays for the power door locks and I'm still having trouble to get driverside lock ,unlock to work . the other three locks, lock and unlock .Do I have to close the driverside door for it to work.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer